Hi,
first of all a praise for the ingenious program, the only thing that can add a timestamp to the data string.
And then also in different formats.
but I have a problem with the recording.
After each data string I get a blank line.
I have this only in the recording.
I have looked through all the settings, but found no setting to change this.
Any tips?
Stefan
CoolTerm empty lines in capture file
- roger
- Site Admin
- Posts: 434
- Joined: Fri Apr 24, 2009 12:41 am
- Contact:
Re: CoolTerm empty lines in capture file
Hi Stefan,
a couple of questions:
- what does your data string look like? Is it terminated by CR, LF, or both?
- what are your "Capture File Options"?
- Do you have "Wait for termination string" and "retain termination string" enabled?
a couple of questions:
- what does your data string look like? Is it terminated by CR, LF, or both?
- what are your "Capture File Options"?
- Do you have "Wait for termination string" and "retain termination string" enabled?
-
- Posts: 4
- Joined: Fri May 15, 2020 6:40 am
Re: CoolTerm empty lines in capture file
Hi, Roger,
thanks for the quick response.
I figured it out myself last night.
My string ends with CR LF and then a question mark.
Don't know why that is...
I had first entered the question mark (3F) as termination.
I changed this to 0D 0A 3F and it works perfectly
maybe another question... is it possible to start your tool as a service?
Greetings
Stefan
thanks for the quick response.
I figured it out myself last night.
My string ends with CR LF and then a question mark.
Don't know why that is...
I had first entered the question mark (3F) as termination.
I changed this to 0D 0A 3F and it works perfectly
maybe another question... is it possible to start your tool as a service?
Greetings
Stefan
-
- Posts: 4
- Joined: Fri May 15, 2020 6:40 am
Re: CoolTerm empty lines in capture file
Hi, Roger,
thanks for the quick response.
I figured it out myself last night.
My string ends with CR LF and then a question mark.
Don't know why that is...
I had first entered the question mark (3F) as termination.
I changed this to 0D 0A 3F and it works perfectly
maybe another question... is it possible to start your tool as a service?
Greetings
Stefan
thanks for the quick response.
I figured it out myself last night.
My string ends with CR LF and then a question mark.
Don't know why that is...
I had first entered the question mark (3F) as termination.
I changed this to 0D 0A 3F and it works perfectly
maybe another question... is it possible to start your tool as a service?
Greetings
Stefan
- roger
- Site Admin
- Posts: 434
- Joined: Fri Apr 24, 2009 12:41 am
- Contact:
Re: CoolTerm empty lines in capture file
Great! I'm glad you got it working.peff wrote:I figured it out myself last night.
No, you can't start it as a service, but it's possible to configure CoolTerm such that it will automatically open the serial port and automatically starts capturing to a file when it starts up. Then you can make CoolTerm a start up item when your Computer starts.peff wrote:maybe another question... is it possible to start your tool as a service?
Here is how to adjust your connection settings to achieve this:
- Miscellaneous / Misc. Options:
- Turn on "Automatically connect on open"
- Receive / Capture File Options:
- Enable "Autostart on open"
- Set the location where you want your capture file to be stored
- If you would like for CoolTerm to always append new data to the same file, even between system restarts, enable "Append to auto capture file" and enter the filename you want.
I hope this makes sense. Let me know if you have any additional, questions.
Roger
-
- Posts: 4
- Joined: Fri May 15, 2020 6:40 am
Re: CoolTerm empty lines in capture file
Hi Roger,
thank you for the information about all the settings, but I had already found them all.
Your tool is very clearly structured and perfect for data logging.
It was just hard to find. Maybe add some keywords like serial port monitor, RS232, Data Logger.
Now I finally have the possibility to log the water level in my 200 year old fountain to find out how much water enters and how fast.
Here in Germany, it is now the third year of drought...
No drop in April and May until now only 4mm.
Best Regards
Stefan Meier
thank you for the information about all the settings, but I had already found them all.
Your tool is very clearly structured and perfect for data logging.
It was just hard to find. Maybe add some keywords like serial port monitor, RS232, Data Logger.
Now I finally have the possibility to log the water level in my 200 year old fountain to find out how much water enters and how fast.
Here in Germany, it is now the third year of drought...
No drop in April and May until now only 4mm.
Best Regards
Stefan Meier
- roger
- Site Admin
- Posts: 434
- Joined: Fri Apr 24, 2009 12:41 am
- Contact:
Re: CoolTerm empty lines in capture file
Cool! I'm glad you find it useful.
We've been having some very dry years here in California as well, and it only seems to be getting worse ever year .
Roger
PS: Great last name!
We've been having some very dry years here in California as well, and it only seems to be getting worse ever year .
Roger
PS: Great last name!