VT100 Emulation

If you have specific questions or problems with any of my Freeware applications, post them here.
Post Reply
jro
Posts: 1
Joined: Tue Feb 26, 2013 2:31 pm

VT100 Emulation

Post by jro »

I typically use the terminal app in OSX to connect to HP switches and a Cisco Router, works fine, but I really want to use CoolTerm.
When I do, I get odd characters that show up.
I have tried zoc6 which does the same thing until I tell it to us V100 emulation, then all is fine.
Is there a setting in CoolTerm that will accomplish this?

Sorry for the novice explanation.

Jay
User avatar
roger
Site Admin
Posts: 431
Joined: Fri Apr 24, 2009 12:41 am
Contact:

Re: VT100 Emulation

Post by roger »

CoolTerm does not support VT100 or any other terminal emulation at the present time. However, you can trap some of the odd characters by enabling the following options in the Connection options (on the "Terminal" tab):
- Handle Bell Character
- Convert Non-printable characters
- Handle Backspace Character

I hope this helps
laneadmin
Posts: 2
Joined: Thu Aug 22, 2013 2:50 pm

Re: VT100 Emulation

Post by laneadmin »

I'm afraid this does not help on HP switches. I believe it is because HP sends escape sequences to format the menu. I found a link that may help provide a better explanation. http://h30499.www3.hp.com/t5/ProCurve-P ... ipG-2TXi3N. I hope this helps to at least identify the problem. I like CoolTerm, but this problem makes it unusable for some of my work.
Post Reply