Simple “hello world” not showing up after entering
-
- Posts: 1
- Joined: Wed Feb 24, 2021 7:11 am
Simple “hello world” not showing up after entering
Using MacOSX and a RaspberryPi Pico. Not able to get anything out and back. Basically stayed with the default settings in CoolTerm, tried a few different baudrates, and changed the serial port.
- roger
- Site Admin
- Posts: 431
- Joined: Fri Apr 24, 2009 12:41 am
- Contact:
Re: Simple “hello world” not showing up after entering
Hi,
have you flashed microPython onto the Pico? You'll need that. Otherwise the Pico won't show up as a serial port and respond to commands from the terminal.
Here are step-by-step instruction of how to get the Pico working with CoolTerm: https://www.youtube.com/watch?v=yzsEr2QCGPw
I hope this helps.
Roger
have you flashed microPython onto the Pico? You'll need that. Otherwise the Pico won't show up as a serial port and respond to commands from the terminal.
Here are step-by-step instruction of how to get the Pico working with CoolTerm: https://www.youtube.com/watch?v=yzsEr2QCGPw
I hope this helps.
Roger