CoolTerm - Auto Reconnect

If you have specific questions or problems with any of my Freeware applications, post them here.
Post Reply
PaulNewf
Posts: 5
Joined: Wed Mar 15, 2017 9:15 am

CoolTerm - Auto Reconnect

Post by PaulNewf »

This is a wishful feature request...

TeraTerm will automatically reconnect when a com port reappears.
i.e.
- you disconnect a USB cable to serial device and CoolTerm/TeraTerm appropriately disconnect
- you reconnect the USB cable and TeraTerm reconnects, Coolterm Doesn't (Tested on TeraTerm v4.105)
- This happens a lot in development, especially with VCP serial ports like on STM32
(Virtual Com Port by code in STM32 is lost for a bit whenever STM32 resets)

I much prefer CooltTerm, so would be very happy if Auto-Reconnect could be added.

Paul
User avatar
roger
Site Admin
Posts: 431
Joined: Fri Apr 24, 2009 12:41 am
Contact:

Re: CoolTerm - Auto Reconnect

Post by roger »

Hi,

I'm currently working on v1.9.0 which will support this feature. If you're interested in testing the latest beta, please sign up for the beta mailing list at http://the-meiers.org/mailman/listinfo/ ... meiers.org to get access.

Roger
Post Reply