Simple “hello world” not showing up after entering

If you have specific questions or problems with any of my Freeware applications, post them here.

Simple “hello world” not showing up after entering

Postby Nkuck » Wed Feb 24, 2021 7:18 am

Using MacOSX and a RaspberryPi Pico. Not able to get anything out and back. Basically stayed with the default settings in CoolTerm, tried a few different baudrates, and changed the serial port.
Nkuck
 
Posts: 1
Joined: Wed Feb 24, 2021 7:11 am

Re: Simple “hello world” not showing up after entering

Postby roger » Tue Mar 16, 2021 3:12 pm

Hi,

have you flashed microPython onto the Pico? You'll need that. Otherwise the Pico won't show up as a serial port and respond to commands from the terminal.

Here are step-by-step instruction of how to get the Pico working with CoolTerm: https://www.youtube.com/watch?v=yzsEr2QCGPw

I hope this helps.

Roger
User avatar
roger
Site Admin
 
Posts: 280
Joined: Fri Apr 24, 2009 12:41 am


Return to Support

Who is online

Users browsing this forum: No registered users and 0 guests

cron